Description
Fixture-to-Fixture Jumper Cord for Votatec Linkable T5 LED Lights
The Votatec T5 fixture-to-fixture jumper cord connects compatible linkable T5 LED fixtures while allowing space between them. It is designed for layouts where fixtures cannot be joined directly because of cabinet breaks, corners, range hoods, shelving gaps, windows, structural interruptions, or separated display sections.
Use the jumper cord to maintain one continuous powered T5 lighting run across multiple installation zones while keeping each fixture positioned where light is actually needed.
Why Use a Votatec T5 Jumper Cord?
Bridge Cabinet Breaks
Continue the lighting run across cabinet gaps, sinks, appliances, range hoods, windows, corners, and other interruptions.
Position Fixtures Independently
Place each fixture where light is required instead of forcing every unit into a direct end-to-end connection.
Maintain One Linked System
Keep separated fixtures electrically connected as part of the same compatible Votatec T5 lighting run.
Recommended Applications
Kitchen Cabinet Breaks
Link fixtures across sinks, range hoods, windows, appliances, cabinet gaps, and inside corners while maintaining a coordinated lighting run.
Retail Shelving & Displays
Connect lighting across separated shelves, display cases, merchandising sections, service counters, and product presentation areas.
Workbenches & Workshops
Bridge gaps between tool storage, shelving, equipment, wall cabinets, repair stations, and task-lighting areas.
Closets & Storage Systems
Link fixtures across shelving sections, closet compartments, storage bays, utility cabinets, and separated lighting zones.
Product Specifications
| Brand | Votatec |
|---|---|
| Product Type | Fixture-to-fixture jumper cord for linkable T5 LED fixtures |
| Primary Function | Links compatible T5 fixtures while allowing spacing between them |
| Connection Configuration | Male connector on one end and female connector on the other |
| System | Compatible Votatec 120V line-voltage linkable T5 lighting system |
| Typical Use | Cabinet breaks, corners, shelving gaps, windows, range hoods, and separated fixture locations |
| Installation Type | Fixture-to-fixture linking accessory |
| Location | Dry indoor applications |
| Power Source Included | No |
| T5 Fixture Included | No |
| Junction Box Included | No |
| Plug-In Cord Included | No |
How the Jumper Cord Connects
1. Position Both Fixtures
Mount the first and second compatible T5 fixtures in the required lighting locations.
2. Connect Both Ends
Attach the jumper cord between the compatible output end of the first fixture and the input end of the next fixture.
3. Route the Cord Safely
Secure and route the cord so it is protected from heat, moisture, sharp edges, moving parts, pinching, and physical damage.
Compatible Votatec T5 Fixtures
Other Votatec T5 Power & Linking Accessories
Related Votatec Collections
Frequently Asked Questions
What does the Votatec T5 jumper cord do?
It links two compatible Votatec T5 fixtures while allowing physical space between them.
When should I use a jumper cord?
Use it when fixtures must remain linked across cabinet breaks, corners, range hoods, windows, shelving gaps, appliances, or other obstructions.
Does the jumper cord supply power by itself?
No. The lighting run still requires a compatible plug-in power cord, direct-wire junction box, or other approved power connection.
Can the jumper cord connect different T5 fixture lengths?
It is intended for compatible fixtures within the Votatec linkable T5 system. Confirm the connection ends, total linked load, and manufacturer instructions.
Is the jumper cord included with the T5 fixtures?
No. It is a separately sold accessory.
How do I choose the correct jumper-cord length?
Measure the actual path between fixture connection points and allow enough length for safe routing without stretching, pinching, or excessive slack.
Need Help Planning a Linked T5 Layout?
Contact MarsLED with the fixture sizes, fixture quantities, cabinet or shelf layout, gap measurements, power method, and number of separated lighting sections.
Order Desk: 1-833-277-6277
Milton: 905-878-9997
Kitchener: 519-893-6666
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.