**Promotion Terms & Conditions Apply. MARS Lighting & Electrical Supplies reserves the right to modify or cancel this offer at any time. Cannot be combined with any other promo/discounts/offer. Contact our in-store sales associate for details. *Minimum order quantities may be required to qualify for this promotional price. Offer valid till stocks last or 12/31/2026. Limited Quantities in stock, Orders fulfilled on First Come First Serve basis. Conditions Apply. All Promotional Sales considered as Final Sales. No Exchange No Returns.
Description
Lightrix 4” LED Slim Panel 9W 750LM 5CCT Round Potlight – 40 Pack Contractor Case
Built for electricians, builders, renovators, property managers, and multi-room projects, this 40-pack contractor case gives you consistent 4” recessed lighting performance, 5CCT flexibility, and project-ready bulk quantity in one case.
40-Pack Project Value
Ideal for contractors buying potlights by the case for basements, full-home renovations, rental units, builder projects, and multi-room installations.
Lower Per-Unit Cost
Case pricing helps reduce per-unit cost compared to smaller quantity purchases. Case price: $260.00. Approx. per unit: $6.98.
Consistent Lighting Finish
Using one 40-pack helps maintain consistent trim style, colour temperature selection, brightness, and installation appearance across the job.
Current Certified Inventory & Previous Product Recall Clarification
This 40-pack contractor case is for the current certified Lightrix 4” LED Slim Panel 9W 750LM 5CCT product supplied from MarsLED’s current inventory.
Earlier inventory of this product family was affected by a product recall / compliance concern. This listing is intended only for the updated current inventory with updated product identification and certification markings.
- Current product label and model identification should be verified before installation.
- Original hologram sticker included for product traceability.
- ETL / Intertek certification marking shown on the product label.
- Energy Star marking shown on current inventory.
- 5CCT selectable: 2700K / 3000K / 4000K / 5000K / 6000K.
- Wet location suitable where installed according to applicable code and manufacturer instructions.
5CCT Selectable Output
Each fixture allows selection between 2700K, 3000K, 4000K, 5000K, and 6000K for warm, neutral, or bright white lighting layouts.
Low-Profile Slim Design
The 4” slim panel format is designed for shallow ceiling spaces where traditional recessed housings may not fit.
Jobsite-Ready Quantity
One case includes 40 units, helping reduce supplier trips and simplify project staging for contractors and renovation crews.
Lightrix 4” LED Slim Panel 40-Pack Contractor Case Overview
The Lightrix 4” LED Slim Panel 9W 750LM 5CCT Round Potlight 40 Pack is designed for contractors and project buyers who need consistent recessed lighting across multiple rooms, units, or job sites.
Instead of buying single potlights one at a time, this contractor case gives electricians and builders a practical bulk quantity for basements, kitchens, bedrooms, hallways, rental unit upgrades, full-home lighting layouts, and light commercial interiors.
- 40 units per case for contractor, builder, renovation, and property management projects.
- Each fixture is a 4” round LED slim panel potlight with remote junction box.
- 9W energy-efficient performance with 750 lumens per fixture.
- Selectable 5CCT output: 2700K / 3000K / 4000K / 5000K / 6000K.
- Helps maintain consistent colour, brightness, trim style, and finish across the installation.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Lightrix |
| Product Type | 4” LED Slim Panel Round Recessed Potlight |
| Pack Size | 40 units per contractor case |
| Model | SPK-G4-9X / updated 4” 5CCT slim panel model as shown on current product label |
| Wattage | 9W per fixture |
| Lumens | 750LM per fixture |
| Total Case Output | Up to 30,000 lumens across 40 fixtures |
| Colour Temperature | 5CCT selectable: 2700K, 3000K, 4000K, 5000K, 6000K |
| CRI | >80 |
| Dimming | Dimmable with compatible dimmers |
| Voltage | 120V, 60Hz |
| Certification / Marking | ETL / Intertek certification marking, Energy Star marking, and original hologram sticker shown on current inventory label |
| Location Rating | Wet location suitable where installed according to applicable code and manufacturer instructions |
| Installation | Slim recessed LED panel with remote junction box and quick-connect cable |
| Application | Residential, renovation, contractor, builder, property management, and light commercial recessed lighting |
Installation Notes
- Installation should be completed by a qualified electrician.
- Confirm ceiling cut-out requirements before installation.
- Set preferred colour temperature before final placement.
- Verify dimmer compatibility before large project deployment.
Contractor Case Benefits
- One case supports multi-room lighting layouts.
- Helps reduce jobsite material shortages.
- Supports consistent trim, finish, and light output.
- Useful for contractor stock, basement jobs, and builder projects.
Recommended Project Uses for a 40-Pack Case
This contractor case is intended for project buyers who need more than a few fixtures and want consistent lighting across the installation.
| Project Type | Typical Use Case |
|---|---|
| Basement finishing | Commonly used across recreation rooms, hallways, bedrooms, laundry areas, and utility spaces. |
| Full-home renovations | Supports consistent recessed lighting across kitchens, living rooms, bedrooms, halls, and bathrooms. |
| Rental unit upgrades | Practical bulk quantity for property managers standardizing lighting across units. |
| Builder and contractor stock | Useful for electricians who regularly install 4” slim panel potlights on residential jobs. |
| Light commercial interiors | Suitable for offices, corridors, service areas, small retail spaces, and back-of-house areas where permitted by code. |
Quantity Planning Guide
- Small room: often 4–6 fixtures depending on layout.
- Basement project: often 12–24 fixtures depending on size.
- Full-home lighting update: often 30–60 fixtures depending on scope.
- 40-pack case is ideal when single-unit purchasing becomes inefficient.
Why Buy by the Case?
- Better suited for contractor workflow.
- Reduces risk of mixed batches or inconsistent appearance.
- Simplifies purchasing for multi-room jobs.
- Supports jobsite planning and inventory control.
Downloads & Product Resources
Use the resources below for product review, installation planning, and contractor purchasing support. Replace placeholder links with final Lightrix documents when available.
Before Ordering a 40-Pack
- Confirm project quantity and allow for spare units.
- Confirm preferred colour temperature setting across the job.
- Check dimmer compatibility if dimming is required.
- Contact MarsLED for larger quantity or repeat contractor orders.
Before Installation
- Verify current product label and certification markings.
- Follow manufacturer installation instructions.
- Install only according to applicable electrical codes.
- Use a qualified electrician for all electrical work.
Lightrix 4” Slim Panel 40-Pack FAQ
How many potlights are included in this contractor case?
Is this the current certified Lightrix 4” LED slim panel inventory?
What colour temperatures are available?
Is the 40-pack better for contractors than buying singles?
Can these be used in bathrooms or damp/wet areas?
Where does MarsLED ship this 40-pack case?
Ordering Lightrix 4” Potlights for a Contractor, Builder, or Multi-Room Project?
This 40-pack contractor case is designed for electricians, contractors, builders, renovators, property managers, and trade customers who need bulk quantities of 4” LED slim panel potlights for consistent project installation.
Shop LED Recessed Lighting & Electrical Supplies in Canada
- Shop LED Potlights & Recessed Lighting
- Shop 4” LED Slim Panel Potlights
- View Lightrix 4” 5CCT Single Unit
- Shop Compatible Dimmers & Switches
- Contact MarsLED for Contractor Pricing & Availability
MarsLED serves electrical contractors, builders, renovators, and trade customers across Ontario, Quebec, Alberta, British Columbia, Manitoba, Saskatchewan, and Atlantic Canada with lighting and electrical supply support.
Contractor LED Potlights Across Canada
The Lightrix 4” LED Slim Panel 5CCT 40 pack contractor case is supplied to electricians, builders, and contractors across Canada, including Ontario, Quebec, Alberta, British Columbia, Manitoba, Saskatchewan, Nova Scotia, New Brunswick, and Newfoundland and Labrador.
In Ontario, contractors commonly use these 4” LED slim panel potlights for basement finishing, residential renovations, and multi-room installations requiring consistent lighting and ESA-compliant products.
In Western Canada, including Alberta and British Columbia, these contractor packs are ideal for new construction, rental units, and large-scale lighting upgrades where bulk purchasing improves project efficiency and reduces jobsite delays.
In Quebec and Eastern Canada, electricians and property managers rely on bulk recessed lighting solutions like this 40-pack contractor case to standardize lighting across multiple units and maintain consistent installation quality.
Always verify installation requirements according to local electrical codes and inspection authorities in your province before installation.
This product was previously listed under earlier naming conventions including YUG 4” LED slim panel potlight 9W 750LM round potlight listings. This page reflects the current Lightrix 4” 5CCT slim panel contractor case supplied in current inventory.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.