Stelpro Electric Baseboard Heaters Stratford, Ontario
Stelpro Brava In Stock at MarsLED
Stratford, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Stratford
Shop stocked Stelpro Brava electric baseboard heaters for Stratford homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Stratford
Electric baseboard heating for Stratford homes and projects.
Electric baseboard heating can be a practical option in Stratford homes, rental units, additional residential units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Stratford property-standards context
Stratford requires dwelling heating systems capable of maintaining 21°C.
Stratford's Property Standards By-law requires every dwelling to have a heating system capable of maintaining a room temperature of 21°C. It also requires heating facilities capable of maintaining at least 18°C in an unfinished basement.
The by-law places responsibility on the owner to keep heating systems, including vent piping and mechanical systems, in good repair. It also requires electrical installations and services to conform to applicable electrical-safety requirements. For Stratford properties designed around electric resistance heating, properly specified permanent baseboard heaters can therefore support replacement, renovation and property-maintenance work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Stratford application guide
Where Brava fits into Stratford projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, internal or accessory-building ARU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Stratford
Stratford may permit up to three dwelling units on a qualifying residential lot.
Stratford uses the term Additional Residential Unit (ARU) for a separate dwelling unit with its own cooking, eating, living, sleeping and sanitary facilities. The City identifies secondary suites, basement apartments, coach houses and tiny homes as examples of ARUs.
Current City guidance says up to three dwelling units on a residential lot, including the primary unit, may be permitted where zoning and servicing requirements are met. That can include three units in the main building, or two units in the main building plus one unit in an accessory building or garage.
Stratford's building-permit guidance requires permits for projects that install, reconstruct or modify heating systems, and for basement work that includes heating modifications or creation of a second suite. If electric baseboard heating forms part of the approved project design, confirm heating load, voltage, wattage, circuit capacity, clearances and installation requirements before ordering.
Stratford ARU considerations
- Confirm zoning and municipal servicing requirements
- Confirm whether the proposed three-unit configuration is permitted
- Obtain required building permits before construction
- Prepare required drawings and project documentation
- Review heating-system changes as part of the permit scope
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WStratford product questions
Stelpro baseboard heater FAQ — Stratford
Where can I buy Stelpro Brava baseboard heaters for a Stratford project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Stratford homeowners, contractors, electricians, landlords and property-management customers.
What heating capability does Stratford's Property Standards By-law require?
Stratford requires every dwelling to have a heating system capable of maintaining a room temperature of 21°C.
What temperature capability does Stratford require for an unfinished basement?
Stratford's Property Standards By-law requires heating facilities capable of maintaining at least 18°C in an unfinished basement.
Can Stelpro baseboard heaters be used in a Stratford additional residential unit?
They can be considered where the permitted ARU's approved electrical and heating design calls for compatible electric baseboard heating. Heater selection should follow the project's zoning, building-permit, electrical and heating requirements.
How many dwelling units can be permitted on a Stratford residential lot?
Stratford's current ARU guidance says up to three dwelling units per residential lot, including the primary dwelling, may be permitted where applicable zoning and servicing requirements are met.
What types of ARUs does Stratford recognize?
Stratford identifies examples including secondary suites, basement apartments, coach houses and tiny homes.
Does a Stratford basement renovation require a building permit?
A building permit is required when basement work includes structural or material alterations, heating or plumbing-system changes, a basement entrance, or creation of a second suite.
Does modifying a heating system in Stratford require a building permit?
Stratford's current building guidance lists installing, reconstructing or modifying heating systems among work that requires a building permit.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Stratford?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects in Stratford and the surrounding Perth County market, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Stratford projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.