Stelpro Electric Baseboard Heaters Peterborough, Ontario
Stelpro Brava In Stock at MarsLED
Peterborough, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Peterborough
Shop stocked Stelpro Brava electric baseboard heaters for Peterborough homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Peterborough
Electric baseboard heating for Peterborough homes and projects.
Electric baseboard heating can be a practical option in Peterborough homes, rental units, additional residential units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Peterborough property-standards context
Peterborough requires residential heating systems capable of maintaining 21°C.
Peterborough's Minimum Property Standards By-law requires a heating system to be installed in a residential building or dwelling unit and to be capable of maintaining 21°C in all habitable rooms, bathrooms and water closet rooms at the outside design temperature specified by the Ontario Building Code.
The heating system must also be maintained in good working condition. For Peterborough properties designed around electric resistance heating, properly specified permanent baseboard heaters can support replacement, renovation and rental-property work where voltage, wattage, circuit capacity, clearances and calculated heating requirements are confirmed.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Peterborough application guide
Where Brava fits into Peterborough projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, internal or detached ARU projects where electric baseboard heat forms part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Peterborough
Peterborough permits up to two ARUs with a qualifying principal dwelling.
Peterborough uses the term Additional Residential Unit (ARU). An ARU is a self-contained residential unit with its own kitchen, bathroom facilities and sleeping areas, located within a dwelling or within a structure ancillary to a dwelling.
Under the City's current zoning framework, a qualifying single-detached, semi-detached or row dwelling can generally have either two ARUs within the principal dwelling, or one ARU within the principal dwelling plus one ARU in an accessory building. This creates a maximum of three dwelling units on the qualifying property.
ARUs must meet zoning and Ontario Building Code requirements. Current City rules also limit an ARU to a maximum of two bedrooms, require the ARU floor area to be less than the principal dwelling unit, address public or permitted private servicing, and prohibit ARUs in a floodway. Detached ARUs have additional setback, height, lot-coverage and firefighter-access requirements.
A building permit is required, with plans that can include site plans, floor layouts, sections, elevations and HVAC/mechanical drawings. Peterborough also offers a pre-approved plans program for detached ARUs to help streamline the building-permit process. If electric baseboard heating forms part of the approved design, confirm heating load, voltage, wattage, circuit capacity, clearances and installation requirements before ordering.
Peterborough ARU considerations
- Confirm the principal dwelling is a qualifying detached, semi-detached or row dwelling
- Choose either two internal ARUs or one internal plus one detached ARU
- Confirm the two-bedroom maximum and applicable floor-area requirements
- Check servicing, floodway, parking and firefighter-access requirements
- Obtain the required building permit before construction
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WPeterborough product questions
Stelpro baseboard heater FAQ — Peterborough
Where can I buy Stelpro Brava baseboard heaters for a Peterborough project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Peterborough homeowners, contractors, electricians, landlords and property-management customers.
What heating capability does Peterborough require in residential buildings?
Peterborough's Minimum Property Standards By-law requires residential heating systems capable of maintaining 21°C in habitable rooms, bathrooms and water closet rooms at the Ontario Building Code outside design temperature.
How must residential heating systems be maintained in Peterborough?
The City's Minimum Property Standards By-law requires the heating system to be maintained in good working condition.
What does Peterborough call secondary residential units?
Peterborough uses the term Additional Residential Unit, or ARU. The City notes that ARUs may also be called second units, basement apartments, accessory apartments, granny flats, in-law apartments or nanny suites.
How many ARUs can be permitted on a qualifying Peterborough property?
Peterborough generally permits up to two ARUs with a qualifying principal dwelling, creating up to three dwelling units on the property.
What ARU configurations are permitted in Peterborough?
A qualifying property can generally have two ARUs within the principal dwelling, or one ARU within the principal dwelling plus one ARU in an accessory building.
What principal dwelling types can support ARUs in Peterborough?
The City's current rules identify qualifying single-detached, semi-detached and row dwellings, subject to the applicable zoning requirements.
How many bedrooms can a Peterborough ARU have?
Current City guidance limits an Additional Residential Unit to a maximum of two bedrooms.
Can an ARU be built in a Peterborough floodway?
No. Current City guidance states that an ARU must not be located in a floodway as defined by the applicable provincial policy framework.
Does a Peterborough ARU require a building permit?
Yes. Building-permit submissions can require site plans, floor layouts, cross sections, elevations and HVAC/mechanical drawings, along with other applicable documentation.
Does Peterborough have pre-approved detached ARU plans?
Yes. The City has a pre-approved plans program for detached Additional Residential Units intended to help streamline the building-permit process. Site-specific requirements and a building permit still apply.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Peterborough?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects serving Peterborough, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Peterborough projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.