Stelpro Electric Baseboard Heaters Pembroke, Ontario
Stelpro Brava In Stock at MarsLED
Pembroke, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Pembroke
Shop stocked Stelpro Brava electric baseboard heaters for Pembroke homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Pembroke
Electric baseboard heating for Pembroke homes and projects.
Electric baseboard heating can be a practical option in Pembroke homes, rental units, additional residential units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Pembroke residential-renovation context
Permanent electric heating for Pembroke homes, rentals and renovation projects.
Pembroke residential renovation and additional-unit projects must be planned around the applicable building, zoning, fire and electrical requirements. The City describes a building permit as the formal permission to begin applicable construction, addition or renovation work and uses the permit process to ensure minimum building standards are met.
For electrically heated Pembroke properties, properly specified permanent baseboard heaters can support replacement, renovation and rental-property work. Before ordering, confirm the project's calculated heating requirements, supply voltage, wattage, circuit capacity, heater clearances and applicable electrical requirements.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Pembroke application guide
Where Brava fits into Pembroke projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, internal or ancillary-structure ARU projects where electric baseboard heat forms part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Pembroke
Pembroke supports ARUs in qualifying detached, semi-detached and townhouse properties.
Pembroke's current 2026 Community Improvement Plan uses the term Additional Residential Unit (ARU). It defines an ARU as a self-contained unit with its own kitchen, bathroom and sleeping area that is secondary to a principal dwelling and is located within a permitted single-detached, semi-detached or townhouse dwelling, or within an ancillary building or structure on the same lot.
The City's current Additional Residential Units Grant is specifically intended to support ARUs on the same property as a single-detached, semi-detached or townhouse dwelling, in accordance with Pembroke's Official Plan and Zoning By-law. The program can provide up to 50% of eligible costs to a maximum of $10,000 per additional residential unit, subject to the City's program requirements and Council discretion.
Pembroke's Zoning By-law regulates permitted uses, building location, lot dimensions, parking, building heights and setbacks. The City's current zoning document continues to recognize secondary dwelling units, including units contained within qualifying principal dwellings or ancillary buildings or structures. Because site-specific zoning provisions and amendments can affect what is permitted, this page does not state a universal city-wide ARU unit maximum.
A building permit is required for applicable construction, additions and renovations. Pembroke's building guidance specifically requires a site plan where alterations include a new second suite, and the City's 2026 ARU grant framework requires new units to comply with the Ontario Building Code, Fire Code, Official Plan, Zoning By-law and Site Plan Control By-law as applicable. If electric baseboard heating forms part of an approved project, confirm heating load, voltage, wattage, circuit capacity, clearances and installation requirements before ordering.
Pembroke ARU considerations
- Confirm the property's zoning and the proposed ARU configuration
- Review whether the unit is internal or within an ancillary building or structure
- Check lot dimensions, setbacks, parking and other applicable zoning standards
- Prepare the required site plan and construction drawings for the permit application
- Confirm Ontario Building Code and Fire Code requirements
- Review current City grant eligibility before starting work if funding is being considered
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WPembroke product questions
Stelpro baseboard heater FAQ — Pembroke
Where can I buy Stelpro Brava baseboard heaters for a Pembroke project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Pembroke homeowners, contractors, electricians, landlords and property-management customers.
What should be confirmed before selecting electric baseboard heat for a Pembroke renovation?
Confirm the project's calculated heating requirements, supply voltage, wattage, circuit capacity, heater clearances and applicable electrical and building requirements before ordering.
What terminology does Pembroke use for additional housing units?
Pembroke's current 2026 Community Improvement Plan uses the term Additional Residential Unit, or ARU.
What is a Pembroke ARU?
The City's current program defines an ARU as a self-contained unit with its own kitchen, bathroom and sleeping area that is secondary to a principal dwelling and located within a qualifying dwelling or an ancillary building or structure on the same lot.
What dwelling types are identified for Pembroke ARUs?
The City's current ARU program identifies permitted single-detached, semi-detached and townhouse dwellings, subject to the Official Plan, Zoning By-law and property-specific requirements.
Can a Pembroke ARU be located in an ancillary building or structure?
Yes. Pembroke's current ARU definition includes a unit contained in a building or structure ancillary to a permitted single-detached, semi-detached or townhouse dwelling on the same lot.
Does this page claim one universal maximum number of ARUs for every Pembroke property?
No. Pembroke's zoning rules and property-specific provisions should be checked for the proposed dwelling type, lot and configuration before assuming what is permitted.
Does Pembroke currently offer an Additional Residential Units Grant?
Yes. The City's current program can provide up to 50% of eligible costs to a maximum of $10,000 per additional residential unit, subject to program requirements and Council discretion.
Should a Pembroke ARU grant application be submitted before work begins?
Yes. The City's 2026 Community Improvement Plan states that an application for the program must be submitted before site work begins and before issuance of a building permit, as applicable.
Does a Pembroke second-suite project require a site plan?
Pembroke's current building guidance states that where proposed alterations include a new second suite, a site plan is required showing property lines, existing and proposed buildings, setbacks and related site information.
Does a Pembroke ARU project require a building permit?
Applicable construction, addition or renovation work requires the appropriate building permit. Confirm the permit requirements with the City for the specific project before construction begins.
What rules must a Pembroke ARU satisfy?
The City's current 2026 grant framework requires the additional unit to conform to applicable Ontario Building Code, Fire Code, Official Plan, Zoning By-law and Site Plan Control By-law requirements.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Pembroke?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects serving Pembroke, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Pembroke projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.