Stelpro Electric Baseboard Heaters Orillia, Ontario
Stelpro Brava In Stock at MarsLED
Orillia, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Orillia
Shop stocked Stelpro Brava electric baseboard heaters for Orillia homes, rental properties, additional dwelling units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Orillia
Electric baseboard heating for Orillia homes and projects.
Electric baseboard heating can be a practical option in Orillia homes, rental units, additional dwelling units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Orillia property-standards context
Orillia requires heating facilities capable of maintaining 20°C during its heating season.
Orillia's current Property Standards requirements state that every occupied dwelling unit or habitable room must have suitable heating facilities capable of maintaining an indoor ambient temperature of 20°C from September 1 through June 15.
The heating system must be maintained in good working condition so the dwelling can be heated safely to the required standard. Orillia also prohibits portable heating equipment from serving as a permanent source of heat in a dwelling unit. For properties designed around electric resistance heating, properly specified permanent baseboard heaters can therefore support replacement, renovation and rental-property maintenance work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Orillia application guide
Where Brava fits into Orillia projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, interior or detached-accessory-structure ADU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional dwelling units in Orillia
Orillia permits up to three ADUs, for a maximum of four dwelling units on a qualifying lot.
Orillia uses the term Additional Dwelling Unit (ADU) for a separate dwelling unit located on the same lot as a single-detached, semi-detached or townhouse dwelling, either within the main building or in a detached accessory structure.
Under Orillia's current 2026 zoning framework, a maximum of three ADUs may be permitted on a qualifying lot. Up to three ADUs may be contained within the main building where there is no ADU in an accessory structure. Alternatively, up to two ADUs may be constructed within a detached accessory structure, provided the total number of dwelling units on the lot does not exceed four.
A building permit is required to create an ADU, including a detached accessory apartment, an ADU within a house or a second unit in an accessory structure. Authorized units must satisfy applicable Building Code, Fire Code, electrical, zoning, occupancy and property-standards requirements.
If electric baseboard heating forms part of the approved project design, confirm heating load, voltage, wattage, circuit capacity, clearances and installation requirements before ordering.
Orillia ADU considerations
- Confirm zoning and dwelling-type eligibility
- Confirm the proposed configuration stays within the four-unit total
- Confirm whether units are inside the main building or in a detached accessory structure
- Obtain the required building permit before construction
- Review parking, lot-grading and property-specific requirements
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WOrillia product questions
Stelpro baseboard heater FAQ — Orillia
Where can I buy Stelpro Brava baseboard heaters for an Orillia project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Orillia homeowners, contractors, electricians, landlords and property-management customers.
What minimum heating capability does Orillia require in occupied dwellings?
Orillia's current Property Standards requirements call for suitable heating facilities capable of maintaining 20°C in occupied dwelling units and habitable rooms from September 1 through June 15.
Can portable heaters be the permanent heat source in an Orillia dwelling unit?
No. Orillia's Property Standards requirements prohibit portable heating equipment from serving as a permanent source of heat in a dwelling unit.
What terminology does Orillia use for secondary residential units?
Orillia uses the term Additional Dwelling Unit, or ADU.
How many ADUs can be permitted on an Orillia lot?
Orillia's current 2026 zoning framework permits a maximum of three ADUs on a qualifying lot, for a maximum of four dwelling units in total.
How many ADUs can be located inside the main building in Orillia?
Up to three ADUs may be located inside a qualifying single-detached, semi-detached or townhouse dwelling where there is no ADU in an accessory structure on the same lot.
Can Orillia ADUs be located in a detached accessory structure?
Yes. Orillia's current zoning permits up to two ADUs within a detached accessory structure, provided the overall lot does not exceed four dwelling units and the applicable zoning requirements are satisfied.
Does an Orillia ADU require a building permit?
Yes. Orillia requires a building permit to create a detached accessory apartment, an additional dwelling unit within a house or a second unit in an accessory structure.
What standards apply to an authorized Orillia ADU?
Authorized units must satisfy applicable Ontario Building Code, Fire Code, electrical, residential-zoning, occupancy and property-standards requirements.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Orillia?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects in Orillia and Simcoe County, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Orillia projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.