Stelpro Electric Baseboard Heaters Oakville, Ontario
Stelpro Brava In Stock at MarsLED
Oakville, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Oakville
Shop stocked Stelpro Brava electric baseboard heaters for Oakville homes, rental properties, accessory apartments, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Oakville
Electric baseboard heating for Oakville homes and projects.
Electric baseboard heating can be a practical option in Oakville homes, rental units, secondary suites and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Oakville rental-heating context
Oakville sets specific heating requirements for residential rental properties.
Oakville's Property Standards By-law requires every residential rental property to have heating facilities capable of maintaining 21°C at an outside design temperature of -18°C. The by-law also says a rental unit cannot use a portable heating appliance as its primary source of heat.
For Oakville rental properties designed around electric resistance heating, maintaining properly specified permanent heating equipment can therefore be an important part of property upkeep, replacement and renovation work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Oakville application guide
Where Brava fits into Oakville projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement or accessory-apartment projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Accessory apartments in Oakville
Basement and accessory-apartment projects need permits and coordinated building design.
Oakville requires a building permit when creating an accessory apartment. The Town's current project guidance calls for zoning review, a separate Zoning Certificate of Occupancy approval and detailed permit documentation, including floor plans and HVAC design where applicable.
Oakville's zoning rules permit additional residential units in qualifying detached, semi-detached, linked and townhouse dwellings. Current zoning provisions allow either up to two attached additional residential units, or one attached and one detached additional residential unit, subject to applicable requirements. If electric baseboard heat forms part of the project design, confirm heater voltage, wattage, circuit capacity, calculated heating requirements and installation conditions before ordering.
Oakville project considerations
- Confirm zoning and additional-unit eligibility
- Obtain the required building permit
- Obtain Zoning Certificate of Occupancy approval where required
- Prepare required floor plans and HVAC documentation
- Confirm electrical requirements with the appropriate authority
- Match heater voltage and wattage to the approved project design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WOakville product questions
Stelpro baseboard heater FAQ — Oakville
Where can I buy Stelpro Brava baseboard heaters for an Oakville project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Oakville homeowners, contractors, electricians, landlords and property-management customers.
What heating capability does Oakville require for residential rental properties?
Oakville's Property Standards By-law requires residential rental properties to have heating facilities capable of maintaining 21°C at an outside design temperature of -18°C.
Can a portable heater be the primary heat source in an Oakville rental unit?
No. Oakville's Property Standards By-law states that a rental unit cannot be equipped with a portable heating appliance as its primary source of heat.
Can Stelpro baseboard heaters be used in an Oakville accessory apartment?
They can be considered where the permitted project's approved electrical and heating design calls for compatible electric baseboard heating. Heater selection should follow the project's permit documents, heating requirements, electrical design and installation requirements.
Does an Oakville accessory apartment require a building permit?
Yes. The Town's current accessory-apartment guidance requires a building permit and identifies zoning review and a separate Zoning Certificate of Occupancy approval as part of project preparation.
How many additional residential units can be permitted in an Oakville house?
Oakville's current zoning provisions allow up to two attached additional residential units, or one attached and one detached additional residential unit, in qualifying dwelling types, subject to applicable zoning requirements.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Oakville?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Oakville projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.