Stelpro Electric Baseboard Heaters Milton, Ontario
Stelpro Brava In Stock at MarsLED
Milton, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Milton
Shop stocked Stelpro Brava electric baseboard heaters for Milton homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Milton
Electric baseboard heating for Milton homes and projects.
Electric baseboard heating can be a practical option in Milton homes, rental units, secondary suites and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Milton rental-heating context
Milton requires at least 20°C in rental housing during its heating period.
Milton's Property Standards By-law requires heat to be provided and maintained at a minimum of 20°C from September 1 through June 15 in habitable areas and other spaces intended for normal tenant use, subject to the provisions of the by-law.
The by-law also requires residential complexes to have heating equipment capable of maintaining the required temperature and, except in an emergency, prohibits portable heating equipment from serving as the primary source of heat in an occupied building. For electrically heated rental properties, properly specified permanent baseboard heating can therefore be part of ongoing maintenance and replacement work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Milton application guide
Where Brava fits into Milton projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, attached or detached ARU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Milton
Milton ARU and basement projects require permits, registration and proper heating design.
Milton defines additional residential units (ARUs) as self-contained dwelling units on a property containing a detached house, semi-detached house or townhouse. In Milton's urban area, up to four residential units in total are permitted on a residential lot with municipal water and sewage services, subject to applicable zoning and building requirements.
A building permit is required to construct an ARU, and Milton established an ARU registration program on April 1, 2025 for new and existing units. The Town's basement-apartment guidance also requires a building permit before work begins and identifies inspections that can include heating rough-in and final heating. If electric baseboard heating forms part of the approved project design, confirm voltage, wattage, circuit capacity and calculated heating requirements before ordering.
Milton ARU considerations
- Confirm zoning and property eligibility
- Obtain the required building permit
- Prepare required plans and construction details
- Complete required building and heating inspections
- Register the ARU with the Town where required
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WMilton product questions
Stelpro baseboard heater FAQ — Milton
Where can I buy Stelpro Brava baseboard heaters for a Milton project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Milton homeowners, contractors, electricians, landlords and property-management customers.
What minimum heat does Milton require in rental housing?
Milton's Property Standards By-law requires at least 20°C in habitable areas and other spaces intended for normal tenant use from September 1 through June 15, subject to the provisions of the by-law.
Can a portable heater be the primary heat source in a Milton rental property?
Except in an emergency, Milton's Property Standards By-law prohibits portable heating equipment from serving as the primary source of heat in an occupied building.
Can Stelpro baseboard heaters be used in a Milton additional residential unit?
They can be considered where the permitted ARU's approved electrical and heating design calls for compatible electric baseboard heating. Heater selection should follow the project's zoning, permit, electrical and heating requirements.
How many residential units can be permitted on a serviced Milton lot?
Milton's current urban ARU framework permits up to four residential units in total on a residential lot with municipal water and sewage services, subject to applicable zoning, building and property-specific requirements.
Does a Milton ARU require registration?
Milton established an ARU registration program on April 1, 2025 for new and existing additional residential units. Registration requirements and fees are subject to the Town's current program rules.
Do I need a building permit to finish a basement in Milton?
Yes. Milton's current guidance states that a building permit is required before finishing any portion of a basement.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Milton?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Milton projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.