Stelpro Electric Baseboard Heaters Markham, Ontario
Stelpro Brava In Stock at MarsLED
Markham, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Markham
Shop stocked Stelpro Brava electric baseboard heaters for Markham homes, rental properties, secondary suites, renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Markham
Electric baseboard heating for Markham homes and projects.
Electric baseboard heating can be a practical option in Markham homes, rental units, secondary suites and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Markham property-standards context
Markham sets daytime and overnight minimum temperatures for homes and apartments.
Markham's current Property Standards guidance applies to both owned and rented dwellings. For the temperature inside a home or apartment, the City identifies a minimum of 20°C between 6:00 AM and 11:00 PM and 16°C overnight from 11:00 PM until 6:00 AM.
For electrically heated homes and rental units, maintaining compatible heating equipment can therefore be an important part of property upkeep. Where electric resistance baseboard heat is appropriate, properly specified replacement heaters can support renovation and maintenance work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Markham application guide
Where Brava fits into Markham projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted secondary-suite projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Secondary suites in Markham
Secondary-suite projects need permits, registration and proper heating design.
Markham describes a secondary suite as a self-contained additional dwelling unit within a house. The City's current homeowner guidance says secondary suites can be added to detached houses, semi-detached houses and row townhouses, subject to applicable requirements.
For new second-suite construction, a building permit is required, and Markham requires two-unit houses to be registered with the City. If electric baseboard heating is part of the approved design, confirm heater voltage, wattage, circuit capacity, heating load and installation requirements before ordering equipment.
Markham project considerations
- Confirm the secondary suite is permitted for the property
- Obtain required building permits before construction
- Complete required inspections and occupancy approvals
- Register a two-unit house with the City
- Confirm heater voltage and calculated heating load
- Follow applicable electrical and manufacturer requirements
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WMarkham product questions
Stelpro baseboard heater FAQ — Markham
Where can I buy Stelpro Brava baseboard heaters for a Markham project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Markham homeowners, contractors, electricians, landlords and property-management customers.
What indoor temperature does Markham's Property Standards guidance require?
Markham identifies a minimum temperature of 20°C from 6:00 AM to 11:00 PM and 16°C from 11:00 PM to 6:00 AM for homes and apartments under its current Property Standards guidance.
Can Stelpro baseboard heaters be used in a Markham secondary suite?
They can be considered where the approved electrical and heating design calls for compatible electric baseboard heating. Heater selection should follow the project's building-permit, electrical, heating-load and installation requirements.
Does a new secondary suite in Markham require a building permit?
Yes. Markham's current guidance states that new construction to create a second suite requires a building permit and must meet the applicable Ontario Building Code requirements.
Do two-unit houses need to be registered in Markham?
Yes. The City states that two-unit houses must be registered and inspected to confirm applicable building and fire-safety compliance.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Which Brava heater works for bedrooms, living rooms or offices?
Stelpro identifies the Brava series for bedrooms, dining rooms, living rooms and offices, but the correct wattage must be selected from the calculated heating load rather than room type alone.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Markham?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Markham projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.