Stelpro Electric Baseboard Heaters Guelph, Ontario
Stelpro Brava In Stock at MarsLED
Guelph, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Guelph
Shop stocked Stelpro Brava electric baseboard heaters for Guelph homes, rental properties, additional dwelling units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Guelph
Electric baseboard heating for Guelph homes and projects.
Electric baseboard heating can be a practical option in Guelph homes, rental units, additional dwelling units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Guelph property-standards context
Guelph requires heating facilities capable of maintaining 21°C in occupied areas.
Guelph's Property Standards By-law requires every building, except an industrial occupancy, to have heating facilities capable of maintaining an indoor ambient temperature of 21°C in all occupied areas.
The by-law also requires heating systems and other mechanical systems to be operated and maintained in good working order and states that portable heating equipment cannot be used as the primary source of heat in any room. For properties designed around electric resistance heating, properly specified permanent baseboard heaters can therefore support replacement, renovation and property-maintenance projects.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Guelph application guide
Where Brava fits into Guelph projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, internal, attached or detached ADU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Guelph
Guelph ADU projects can add up to two additional units on qualifying lots.
Guelph defines an Additional Residential Unit (ADU) as a self-contained dwelling unit with its own kitchen, washroom and sleeping area that is either attached to the principal dwelling or located in a detached building on the same lot.
Current City guidance says a lot containing a single-detached house, semi-detached house or townhouse may contain up to two additional dwelling units, for a total of three units, subject to applicable zoning and property-specific requirements. ADUs can be created by converting existing space, adding to the main building, converting an accessory structure or constructing a new accessory structure.
A building permit is required to create an ADU, and occupancy must be approved by Guelph Building Services. Electrical work also requires an ESA permit. If electric baseboard heating forms part of the approved project design, confirm heating load, voltage, wattage, circuit capacity and installation requirements before ordering.
Guelph ADU considerations
- Confirm zoning and property eligibility
- Obtain the required building permit
- Prepare required plans and project documentation
- Complete required inspections before occupancy
- Obtain an ESA permit for electrical work
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WGuelph product questions
Stelpro baseboard heater FAQ — Guelph
Where can I buy Stelpro Brava baseboard heaters for a Guelph project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Guelph homeowners, contractors, electricians, landlords and property-management customers.
What heating capability does Guelph's Property Standards By-law require?
Guelph requires heating facilities capable of maintaining an indoor ambient temperature of 21°C in all occupied areas of buildings other than industrial occupancies.
Can portable heaters be used as the primary source of heat in Guelph?
Guelph's Property Standards By-law states that portable heating equipment cannot be used as the primary source of heat in any room.
Can Stelpro baseboard heaters be used in a Guelph additional dwelling unit?
They can be considered where the permitted ADU's approved electrical and heating design calls for compatible electric baseboard heating.
How many ADUs can be permitted on a Guelph property?
Current City guidance says a single-detached home can accommodate up to three ADUs, while a semi-detached home, duplex or on-street townhouse can accommodate up to two, subject to applicable requirements.
Can a Guelph property have four dwelling units?
Guelph's current zoning framework permits up to four dwelling units on qualifying low-density residential lots, subject to applicable requirements.
Does a Guelph ADU require a building permit and registration?
Yes. A building permit is required to create an ADU, and the City's current process also requires ADUs to be registered.
Do I need a permit to finish a basement in Guelph?
Yes. Guelph lists finishing a previously unfinished basement among interior renovations requiring a building permit.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Guelph?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects in Guelph, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Guelph projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.