Stelpro Electric Baseboard Heaters Grimsby, Ontario
Stelpro Brava In Stock at MarsLED
Grimsby, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Grimsby
Shop stocked Stelpro Brava electric baseboard heaters for Grimsby homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Grimsby
Electric baseboard heating for Grimsby homes and projects.
Electric baseboard heating can be a practical option in Grimsby homes, rental units, additional residential units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Grimsby property-standards context
Grimsby requires dwelling heating systems to be maintained in good working condition.
Grimsby's Property Standards By-law requires every dwelling unit to have a heating system capable of maintaining an adequate and suitable supply of heat in accordance with the Town's heating requirements.
The same by-law requires heating systems to be maintained in good working condition so they can heat the building safely to the required standard. It also requires electrical wiring and fixtures to be installed and maintained in good working order. For Grimsby properties designed around electric resistance heating, properly specified permanent baseboard heaters can therefore support replacement, renovation and property-maintenance work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Grimsby application guide
Where Brava fits into Grimsby projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, attic, attached or detached-building ARU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Grimsby
Grimsby allows up to two ARUs on qualifying municipally serviced urban residential lots.
Grimsby uses the term Additional Residential Unit (ARU) for a self-contained dwelling unit located within or attached to the principal dwelling, or in a detached accessory building on the same lot. Examples include basement or attic conversions and units in detached garages.
Following amendments approved in August 2025, Grimsby's current framework allows a maximum of two ARUs on qualifying urban residential land within the Urban Settlement Boundary where municipal servicing is available and a single-detached, semi-detached or street-townhouse dwelling is permitted. A typical configuration can include two ARUs within or attached to the principal dwelling, or one within or attached to the principal dwelling plus one in an accessory building.
Different limits apply in other areas. Grimsby's current guide allows a maximum of one ARU on qualifying residential hamlet land, while urban land within the Niagara Escarpment Plan Area is limited to one ARU within the principal dwelling structure and is subject to additional conditions.
A building permit is required to create an ARU. If electric baseboard heating forms part of the approved project design, confirm heating load, voltage, wattage, circuit capacity, clearances and installation requirements before ordering.
Grimsby ARU considerations
- Confirm whether the property is urban, hamlet or within the Niagara Escarpment Plan Area
- Confirm municipal servicing and zoning eligibility
- Confirm whether one or two ARUs are permitted for the property
- Obtain the required building permit before construction
- Review parking, setbacks and accessory-building requirements
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WGrimsby product questions
Stelpro baseboard heater FAQ — Grimsby
Where can I buy Stelpro Brava baseboard heaters for a Grimsby project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Grimsby homeowners, contractors, electricians, landlords and property-management customers.
What does Grimsby's Property Standards By-law require for dwelling heating systems?
Grimsby requires every dwelling unit to have a heating system capable of maintaining an adequate and suitable supply of heat in accordance with the Town's heating requirements.
How must heating systems be maintained in Grimsby?
Grimsby's Property Standards By-law requires heating systems to be maintained in good working condition so they can heat the building safely to the required standard.
What terminology does Grimsby use for secondary residential units?
Grimsby uses the term Additional Residential Unit, or ARU.
How many ARUs can be permitted on a serviced urban Grimsby lot?
Grimsby's current framework allows a maximum of two ARUs on qualifying municipally serviced urban residential land, subject to zoning and property-specific requirements.
Can a Grimsby ARU be located in a detached accessory building?
Yes. One permitted configuration allows one ARU within or attached to the principal dwelling and one ARU within or as a detached accessory building, subject to applicable requirements.
How many ARUs are permitted on qualifying hamlet land in Grimsby?
Grimsby's current guide allows a maximum of one ARU on qualifying residential hamlet land.
Are there special ARU limits in the Niagara Escarpment Plan Area?
Yes. Grimsby's current guide states that urban lands within the Niagara Escarpment Plan Area may have a maximum of one ARU within the principal dwelling structure and are subject to additional conditions.
Does a Grimsby ARU require a building permit?
Yes. Grimsby's building-permit guidance requires a permit to create an accessory or additional residential unit.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Grimsby?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects in Grimsby and Niagara Region, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Grimsby projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.