Stelpro Electric Baseboard Heaters Burlington, Ontario
Stelpro Brava In Stock at MarsLED
Burlington, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Burlington
Shop stocked Stelpro Brava electric baseboard heaters for Burlington homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Burlington
Electric baseboard heating for Burlington homes and projects.
Electric baseboard heating can be a practical option in Burlington homes, rental units, secondary suites and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Burlington rental-heating context
Burlington requires 20°C minimum heat in residential rental buildings.
Burlington's Property Standards By-law requires heat in residential rental buildings to be provided and maintained at a minimum of 20°C from September 1 through May 31. The requirement includes recreation rooms and laundry rooms, while excluding locker rooms and garages.
The by-law also requires residential rental units to have heating equipment capable of maintaining that temperature and says portable heating equipment cannot be used as the primary source of heat in an occupied building except in an emergency. For electrically heated properties, properly specified permanent baseboard heating can therefore be an important part of replacement and maintenance work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Burlington application guide
Where Brava fits into Burlington projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, attached or detached ARU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Burlington
Burlington ARU projects require zoning review, permits and inspections.
Burlington defines additional residential units (ARUs) as self-contained living units on the same property as a primary home. They can include basement apartments, attached suites, garage conversions, permanent tiny homes and coach houses.
The City allows applications for one, two or three ARUs on qualifying properties, subject to zoning and other requirements, and requires a building permit for new ARUs or for legalizing existing units. Burlington's process begins with pre-building approval and zoning review, followed by the building permit, construction inspections and final occupancy. If electric baseboard heating forms part of the approved design, confirm voltage, wattage, circuit capacity and heating requirements before ordering.
Burlington ARU considerations
- Confirm what the property's zoning permits
- Complete the City's pre-building approval process
- Obtain the required building permit
- Follow applicable building and electrical requirements
- Complete required construction inspections
- Receive final occupancy approval before use
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WBurlington product questions
Stelpro baseboard heater FAQ — Burlington
Where can I buy Stelpro Brava baseboard heaters for a Burlington project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Burlington homeowners, contractors, electricians, landlords and property-management customers.
What minimum heat does Burlington require in residential rental buildings?
Burlington's Property Standards By-law requires at least 20°C in residential rental buildings from September 1 through May 31, subject to the provisions of the by-law.
Can a portable heater be the primary heat source in a Burlington rental property?
Except in an emergency, Burlington's Property Standards By-law says an occupied building cannot use portable heating equipment as its primary source of heat.
Can Stelpro baseboard heaters be used in a Burlington additional residential unit?
They can be considered where the permitted ARU's approved electrical and heating design calls for compatible electric baseboard heating. Heater selection should follow the project's zoning, permit, electrical and heating requirements.
Does a Burlington ARU require a building permit?
Yes. Burlington requires a building permit for new additional residential units and for work intended to legalize existing units.
How many ARUs can be considered on a Burlington property?
Burlington's current guidance allows applications for one, two or three ARUs on a property, subject to zoning regulations, performance standards and property-specific requirements.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Burlington?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Burlington projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.