Stelpro Electric Baseboard Heaters Barrie, Ontario
Stelpro Brava In Stock at MarsLED
Barrie, Ontario • Electric Heating
Stelpro Electric Baseboard Heaters in Barrie
Shop stocked Stelpro Brava electric baseboard heaters for Barrie homes, rental properties, additional residential units, basement renovations, contractor projects and property-management applications. MarsLED carries 120 V and 240/208 V Brava models plus compatible built-in thermostat options.
Stelpro Brava Barrie
Electric baseboard heating for Barrie homes and projects.
Electric baseboard heating can be a practical option in Barrie homes, rental units, additional residential units and renovation projects where the electrical and heating design calls for electric resistance heat. Stelpro Brava heaters provide multiple wattage and voltage configurations for project-specific selection.
Stelpro identifies Brava for bedrooms, dining rooms, living rooms and offices. Its rounded corners, one-piece rugged casing and installer-friendly design also make the platform useful for replacement work and ongoing property maintenance.
Why Brava?
Brava combines low-profile electric convection heat with the durability and clean appearance needed for residential and appropriate light-commercial environments.
- Rounded-corner design
- Rugged one-piece steel casing
- Quiet heating-element design
- Multiple wattage and voltage options
- Optional built-in thermostat control
Barrie property-standards context
Barrie requires residential heating systems capable of maintaining 20°C year-round.
Barrie's current Property Standards By-law requires every dwelling to have an approved heating system capable of maintaining a room temperature of 20°C in all habitable rooms, bathrooms and washrooms.
The City specifically states that its heat regulations apply year-round, with no seasonal “turn on” or “turn off” dates. Heating systems must also be maintained in good working condition so they can heat the dwelling safely to the required standard. For Barrie properties designed around electric resistance heating, properly specified permanent baseboard heaters can therefore support replacement, renovation and rental-property maintenance work.
Stocked at MarsLED
Compare Stelpro Brava baseboard heaters.
Choose from the stocked MarsLED Brava range below. Heater selection should be based on the project's calculated heating load, voltage, circuit requirements, dimensions, clearances and applicable electrical requirements—not wattage or room size alone.
| Model | Power | Voltage | Length | Shop |
|---|---|---|---|---|
| B0501W | 500 W | 120 V | 27-7/8" | View B0501W |
| B0751W | 750 W | 120 V | 37-5/8" | View B0751W |
| B1001W | 1000 W | 120 V | 47-1/2" | View B1001W |
| B0502W | 500 / 375 W | 240 / 208 V | 27-7/8" | View B0502W |
| B0752W | 750 / 560 W | 240 / 208 V | 37-5/8" | View B0752W |
| B1002W | 1000 / 750 W | 240 / 208 V | 47-1/2" | View B1002W |
| B1502W | 1500 / 1125 W | 240 / 208 V | 66-1/4" | View B1502W |
| B2002W | 2000 / 1500 W | 240 / 208 V | 83-7/8" | View B2002W |
Electrical selection
120 V or 240/208 V? Match the heater to the project.
Voltage must match the electrical design and circuit serving the heater. When replacing an existing baseboard or planning a new installation, confirm voltage, wattage, circuit capacity and installation conditions before ordering.
B0501W • B0751W • B1001W
MarsLED stocks three 120 V Brava models from 500 W through 1000 W for projects designed around 120 V electric baseboard heating.
500 W through 2000 W
The stocked 240/208 V Brava range includes five models. Output is lower at 208 V, so both ratings are shown on the individual product pages.
Barrie application guide
Where Brava fits into Barrie projects.
Brava heaters can support a wide range of projects when electric resistance baseboard heat is appropriate for the building and the heater is correctly specified.
Replacement or new electric heating in bedrooms, living areas, offices, basements and additions.
Heating for permitted basement, interior, addition or detached coach-house ARU projects where electric baseboard heat is part of the approved electrical and heating design.
Replacement and maintenance work in electrically heated rented residential units.
Stocked heater options for ongoing building maintenance, renovation and replacement programs.
Multiple wattage and voltage options for properly specified installation and retrofit work.
A familiar electric-heating platform for renovation, addition and residential construction projects.
Additional residential units in Barrie
Barrie permits up to three ARUs, for a maximum of four residential units on a qualifying lot.
Barrie uses the term Additional Residential Unit (ARU). The City's current zoning framework permits a maximum of three additional residential units per qualifying lot, for a maximum of four residential units in total.
ARUs can be created through interior conversions or additions to a single-detached, semi-detached or street-townhouse dwelling, and may also be located in an accessory building or structure. Barrie's current guidance also identifies secondary dwellings and coach houses as detached ARU examples.
A building permit is required, and after permit issuance mandatory inspections are required to confirm compliance with fire, electrical and building-safety standards. Barrie also provides standardized detached ARU designs, but property owners must still meet site-specific zoning requirements and obtain a building permit.
For 2026, Barrie is reducing building-permit application fees for new ARUs by 50%, with full rebates available for qualifying units that achieve occupancy or equivalent final inspection within 12 months of permit issuance. If electric baseboard heating forms part of the approved project design, confirm heating load, voltage, wattage, circuit capacity, clearances and installation requirements before ordering.
Barrie ARU considerations
- Confirm zoning and lot eligibility
- Confirm the project stays within the four-unit total
- Obtain the required building permit before construction
- Review parking, servicing, setbacks and access-path requirements
- Book all required building inspections after permit issuance
- Match heater voltage and wattage to the approved electrical and heating design
Built-in temperature control
Complete the Brava installation with a Stelpro thermostat.
MarsLED stocks both built-in mechanical thermostat options. Compatibility and the correct control type should be confirmed for the specific heater and project before installation.
Single-Pole Built-In Thermostat
Mechanical 120–600 V built-in temperature control for compatible Stelpro baseboard heater installations.
View SIBT1WDouble-Pole Built-In Thermostat
Mechanical 120–600 V double-pole built-in thermostat for compatible Stelpro baseboard heater installations.
View SIBT2WBarrie product questions
Stelpro baseboard heater FAQ — Barrie
Where can I buy Stelpro Brava baseboard heaters for a Barrie project?
MarsLED stocks multiple Stelpro Brava 120 V and 240/208 V electric baseboard heaters for Barrie homeowners, contractors, electricians, landlords and property-management customers.
What minimum heating capability does Barrie require in dwellings?
Barrie's current Property Standards By-law requires an approved heating system capable of maintaining 20°C in habitable rooms, bathrooms and washrooms.
Does Barrie's 20°C heat requirement apply only in winter?
No. The City states that its heat regulations are a year-round requirement and that there are no seasonal turn-on or turn-off dates.
What terminology does Barrie use for secondary residential units?
Barrie uses the term Additional Residential Unit, or ARU.
How many ARUs can be permitted on a Barrie lot?
Barrie's current zoning framework permits a maximum of three ARUs per qualifying lot, for a maximum of four residential units in total.
Can a Barrie ARU be located in a detached structure?
Yes. Barrie's current framework allows ARUs in accessory buildings or structures, including detached secondary dwellings and coach houses, subject to zoning and site requirements.
Does a Barrie ARU require a building permit?
Yes. A building permit is required, and mandatory inspections are required after permit issuance.
Does Barrie offer standardized detached ARU designs?
Yes. The City provides standardized detached ARU designs, but each property must still satisfy site-specific zoning requirements and obtain a building permit.
Is Barrie offering ARU permit-fee incentives in 2026?
Yes. Barrie is reducing eligible new-ARU building-permit application fees by 50% in 2026 and offers full rebates for qualifying units that reach occupancy or equivalent final inspection within 12 months of permit issuance.
Can I replace an old baseboard heater with a Brava model of the same wattage?
Not automatically. Confirm voltage, circuit requirements, calculated heating load, dimensions, clearances and installation requirements before choosing a replacement.
Should I buy a 120 V or 240 V baseboard heater?
The heater voltage must match the electrical design of the project. Confirm the existing circuit or project requirements before ordering.
Does MarsLED supply Stelpro heaters for contractor and property-management projects in Barrie?
Yes. MarsLED's stocked Brava portfolio is available for residential, renovation, rental-property, contractor and property-management projects in Barrie and Simcoe County, subject to product availability.
Can a built-in thermostat be added to a Stelpro Brava heater?
Compatible Brava installations can use optional built-in thermostat controls. MarsLED stocks the Stelpro SIBT1W single-pole and SIBT2W double-pole thermostat options.
Shop Stelpro Brava heaters for Barrie projects.
Compare stocked wattages, voltages and thermostat options from MarsLED.