192W 24VDC Non-dimmable Class P Type HL Class 2 Multi-channels, constant voltage LED driver UL/cUL
- Output constant voltage
- UL/cUL listed, Class 2, Class P, Type HL approval
- Input voltage range: 100-277VAC
- Built-in PFC function / PF>0.99
- Efficiency >87%
- Protections:short circuit/over voltage/over heat
- 1.0 version suitable for dry & damp location
- 2.0 & 3.0 version suitable for dry, damp & wet location
- Cooling by free air convection
- Suitable for LED lighting and moving sign applications
- Compliance to worldwide safety regulations for lightings.
- 7 Years Warranty
|Power Factor(Typ.)@full load||0.99@120VAC 0.94@277VAC|
|Inrush Current(Typ.)||15A, 50%, 1.4ms|
|Full Load||87%@120VAC , 89%@277VAC|
|Inrush Current (Typ.)||19A (twidth=1.3ms) @120VAC ; 38A (twidth=960us) @277VAC|
|Protection||Short Circuit||shut down o/p voltage, re-power on to recover after fault condition is removed|
|Over loading||≤120% constant current limiting, auto-recovery|
|Over temperature||100℃±10℃ shut down o/p voltage, automatically recover after cooling.|
|Over Current||≤1.4*I out|
|Vibration||10～500Hz 2G 10min./1 cycle，period for 60min.each along X,|
|Withstand voltage||I/P-O/P: 1.88KVAC|
|Safety&EMC||EMC EMISSION||FCC 47 CFR Part 15 ,Subpart B|
|EMC IMMUNITY||EN61000-4-2,3,4,5,6,11（Surge 4KV）|
|Size||1.0 version:278*108*46mm / 2.0 version:278*110*45mm|
|packaging||285*275*245mm/10pcs /CTN G.W.:22.10KG/CTN|
|Notes||1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated|
|load and 25℃of ambient temperature.|
|2.Tolerance:includes set us tolerance,line regulation and load regulation.|
※Input:18AWG Black and White to be connected to AC L and N ,Green wire go ground,
※Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-).
※Class 2 standard output terminal. Three groups of cables for SMT-012-180VWJ2, SMT-012-180VWJ2V2, SMT-012-180VWJ2WV2,; two groups for SMT-024-192VWJ2,SMT-024-192VWJ2V2,SMT-024-192VWJ2WV2
※To extend their life, please refer to the Derating Curve and derate according to the temperature.
■ Connecting Diagram
■ Simple Connection Diagram:
※This driver should be installed by qualified and professional person;
※Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
※Ensure that wiring is correct before test in order to avoid light and power supply damage;
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.